Pure Water Filtration LLC · Kyle Wood

Water Softeners & Filtration in Hartland, MI

Planning a water-treatment installation in Hartland? Start with your water-test results. Talk directly with Kyle about hardness, iron staining, odors, or drinking-water filtration and the equipment that fits your home.

Mon–Fri 9AM–5PM · Sat 9AM–3PM. Contact Kyle to confirm availability at your address.

Hartland’s water, by the township’s own numbers

Hartland Township’s municipal water comes from three groundwater wells more than 200 feet deep. The treatment plant removes iron and manganese, but it does not soften. In the township’s 2025 Water Quality Report, hardness averaged 460 mg/L, with samples from 426 to 590 mg/L. That is roughly 27 to 34.5 grains per gallon, and the report itself puts distribution-system hardness around 34.5 grains. The township recommends installing a water softener in every home because its water is consistently hard.

After treatment, iron in the 2025 samples averaged 0.01 mg/L (range 0.01–0.7). Sodium measured 61 ppm (2025). Arsenic was 3 ppb in the most recent sampling (2018), under the 10 ppb federal limit. Questions about township water go to Hartland’s Department of Public Works at (810) 632-7498.

The municipal system serves only parts of the township. Homes outside it are on private wells, where hardness and iron vary from lot to lot, and nobody tests them but the owner. Livingston County lists two certified labs for bacteria, nitrate and arsenic: Brighton Analytical (810-229-7575) and Water Tech (517-548-2505).

How Hartland compares with nearby public water systems, using each system’s own published figures:

Water systemHardnessTreatmentSource
Hartland Township460 mg/L average (426–590), about 27–34.5 grainsIron and manganese removal; not softened2025 Water Quality Report
Highland Township324 ppm, about 19 grainsIron 0.5 ppm reportedTownship water quality report
City of Brighton25–27 grains per gallonIron removal; not softened2025 Water Quality Report
City of Fenton100–130 ppm, 6–8 grainsLime-softened at the plantCity water plant page
MHOG (Marion, Howell, Oceola, Genoa)94 mg/L, about 5.5 grainsIron removal and lime softening2025 Water Quality Report

Start with the water at your Hartland home

Tell Kyle whether your home uses a private well or a public water supply, what concerns you have noticed, and whether treatment equipment is already installed. If you have a recent utility report or laboratory result, keep it available for the visit.

Free in-home testing

Kyle checks hardness, iron, pH, chlorine, and total dissolved solids (TDS) to help guide equipment recommendations.

Equipment for your needs

Your measured water conditions, household water use, plumbing, and installation space help determine the proposed system.

A clear installation plan

Review the exact equipment, installation work, schedule, ongoing care, and written warranty terms with Kyle before proceeding.

The free visit is not a comprehensive contaminant or drinking-water safety test. Concerns about bacteria, PFAS, nitrate, arsenic, or lead need appropriate testing; consult your local health department or a certified laboratory.

Installed starting prices

These are approximate starting prices confirmed by Kyle. Your quote depends on your water, selected equipment, and installation requirements.

Water softener

From about $2,000

A system selected for measured hardness and household water use. Ask about the Clack® control, tank size, salt requirements, and routine care.

Iron filtration

From about $2,100

Iron filtration selected for your test results. This price is for the iron system only; a softener is a separate system.

Reverse osmosis

From about $900

An under-sink drinking-water system. Check the proposed model’s certified reduction claims and filter replacement requirements.

Need both a softener and an iron filter? Ask Kyle for a combined quote. Explore treatment services.

Clack air-induction filtration tank and plumbing in a utility room
A Clack air-induction installation photographed by Pure Water Filtration. Project location is not specified.

Talk directly with Kyle

Ask about the proposed equipment and how it will be cared for after installation. Model specifications and your water results matter more than a blanket performance percentage.

See what customers say about working with Pure Water Filtration.

Read customer reviews on Google →

Existing equipment?

Contact Kyle to discuss service availability. Equipment evaluation is $90 for the trip plus $175 per hour. Salt delivery is not currently offered.

Hartland water-treatment questions

How do I know whether I need a water softener?

Start with measured hardness and your household’s needs. A softener addresses hardness; other water concerns may need a different treatment approach. Kyle’s free test helps guide that discussion.

Will a softener also address iron or sulfur odor?

Separate filtration may be appropriate. Tell Kyle about the symptoms, review your water results, and confirm the proposed equipment’s specifications before selecting a system.

How soon can testing or installation be scheduled?

Call Kyle for current availability in Hartland. Installation time depends on the equipment and plumbing work needed, and can be discussed when preparing your quote.

How should I prepare for the visit?

Have your existing water reports and equipment details available, and note where and when you notice problems. Confirm any sampling preparation instructions with Kyle when scheduling.

What will a drinking-water filter reduce?

Check the exact model’s certified reduction claims and performance information for the contaminants you want to address. NSF explains how to check water-treatment claims.

Request your free water test in Hartland

Use the contact form to tell Kyle about your water and location. He will follow up to discuss appointment availability.

Mon–Fri 9AM–5PM · Sat 9AM–3PM · Sunday closed

More local information