Pure Water Filtration LLC · Kyle Wood
Water Softeners & Filtration in Milford, MI
Planning a water-treatment installation in Milford? Start with your water-test results. Talk directly with Kyle about hardness, iron staining, odors, or drinking-water filtration and the equipment that fits your home.
Mon–Fri 9AM–5PM · Sat 9AM–3PM. Contact Kyle to confirm availability at your address.
Milford’s water: what the village report shows
The Village of Milford draws from two wells, a 12-inch and a 16-inch, both 114 feet deep. A third 16-inch well has been drilled for future use. Well water goes to the village’s iron removal plant, built in 1974, where it is filtered to remove iron. Chlorine and fluoride are added as it leaves the plant, and fluoride averaged 0.71 ppm in 2024.
Two numbers in the village’s 2024 Water Quality Report are worth knowing. Sodium was 89 ppm (2024), which matters if anyone in the house is on a low-sodium diet. Arsenic was 4 ppb in the 2022 sampling, under the 10 ppb federal limit. The report doesn’t list hardness, so the only way to know your grains is to test at the tap. For questions about village water, call the Department of Public Services at 248-685-3055.
Outside the village, Milford Township homes are on private wells. When the U.S. Geological Survey sampled Oakland County wells from 1988 to 1997, 663 of 1,988 (about one in three) had arsenic above today’s 10 µg/L limit. The Oakland County Health Division recommends sampling private wells for arsenic every few years. Bottles and forms are available at the North Oakland Health Center in Pontiac (248-858-1312).
Nearby public water systems, using each system’s own published figures:
| Water system | Hardness | Treatment | Source |
|---|---|---|---|
| Village of Milford | Not published | Iron removal plant; chlorine; fluoride | 2024 Water Quality Report |
| Highland Township | 324 ppm, about 19 grains | Iron 0.5 ppm reported | Township water quality report |
| City of South Lyon | Not published | Iron filtration (plant rebuilt 2002) | City water department |
| Novi, Wixom, Walled Lake (Great Lakes Water Authority) | 113 mg/L, about 6.5 grains | Treated Great Lakes water | GLWA 2023 data |
| Hartland Township | 460 mg/L average, about 27 grains | Iron and manganese removal | 2025 Water Quality Report |
Start with the water at your Milford home
Tell Kyle whether your home uses a private well or a public water supply, what concerns you have noticed, and whether treatment equipment is already installed. If you have a recent utility report or laboratory result, keep it available for the visit.
Free in-home testing
Kyle checks hardness, iron, pH, chlorine, and total dissolved solids (TDS) to help guide equipment recommendations.
Equipment for your needs
Your measured water conditions, household water use, plumbing, and installation space help determine the proposed system.
A clear installation plan
Review the exact equipment, installation work, schedule, ongoing care, and written warranty terms with Kyle before proceeding.
The free visit is not a comprehensive contaminant or drinking-water safety test. Concerns about bacteria, PFAS, nitrate, arsenic, or lead need appropriate testing; consult your local health department or a certified laboratory.
Installed starting prices
These are approximate starting prices confirmed by Kyle. Your quote depends on your water, selected equipment, and installation requirements.
Water softener
From about $2,000
A system selected for measured hardness and household water use. Ask about the Clack® control, tank size, salt requirements, and routine care.
Iron filtration
From about $2,100
Iron filtration selected for your test results. This price is for the iron system only; a softener is a separate system.
Reverse osmosis
From about $900
An under-sink drinking-water system. Check the proposed model’s certified reduction claims and filter replacement requirements.
Need both a softener and an iron filter? Ask Kyle for a combined quote. Explore treatment services.
Talk directly with Kyle
Ask about the proposed equipment and how it will be cared for after installation. Model specifications and your water results matter more than a blanket performance percentage.
See what customers say about working with Pure Water Filtration.
Read customer reviews on Google →
Existing equipment?
Contact Kyle to discuss service availability. Equipment evaluation is $90 for the trip plus $175 per hour. Salt delivery is not currently offered.
Milford water-treatment questions
How do I know whether I need a water softener?
Start with measured hardness and your household’s needs. A softener addresses hardness; other water concerns may need a different treatment approach. Kyle’s free test helps guide that discussion.
Will a softener also address iron or sulfur odor?
Separate filtration may be appropriate. Tell Kyle about the symptoms, review your water results, and confirm the proposed equipment’s specifications before selecting a system.
How soon can testing or installation be scheduled?
Call Kyle for current availability in Milford. Installation time depends on the equipment and plumbing work needed, and can be discussed when preparing your quote.
How should I prepare for the visit?
Have your existing water reports and equipment details available, and note where and when you notice problems. Confirm any sampling preparation instructions with Kyle when scheduling.
What will a drinking-water filter reduce?
Check the exact model’s certified reduction claims and performance information for the contaminants you want to address. NSF explains how to check water-treatment claims.
Request your free water test in Milford
Use the contact form to tell Kyle about your water and location. He will follow up to discuss appointment availability.
Mon–Fri 9AM–5PM · Sat 9AM–3PM · Sunday closed